A/C and Refrigeration System Tools

RS-16

1/8" to 5/8" O.D.

RS-25

1/8" to 1" O.D.

RS-35

1/8" to 1 3/8" O.D.

RS-42

1/8" to 1 5/8" O.D.

14338

REFCO roller for tubing construction.

Useful for brazed or sweat type connections

14285

RFA-105-FF

Pinch off tools for 1/4", 3/8" and 1/2"

14200

Pinch off pliers up to 3/8" O.D.

14215

Capillary tube cutter

No need to swage after cutting
the tube

14210

Piercing pliers with changeable piercing needle and access fitting

525-F

Flaring and burnishing in one tool.

Sizes from 3/16" to 5/8" O.D.

RF-888-Z

45° Eccentric flaring tool in inch-sizes.

Made of forged high quality steel for tubes with an outside-diameter of: 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4". Supplied in a sturdy plastic case

RF-275-FS

Flaring and swaging tool for tubes with an outside-diameter of: 3/16", 1/4", 5/16", 3/8", 1/2", 5/8".

Supplied in a plastic case

RF-175-FS

45° Flaring and swaging tool in inch sizes.

Made of forged high quality steel for tubes with an outside-diameter of:
1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4".

Supplied in a sturdy plastic case

BS-6

RFA-364

RFA-368-FH

Triple-header tube bender. 

Bends all tubes with an O.D. of 1/4", 5/16" and 3/8" to a 90-degree bend   

HY-TELL

Part No. 4688017

TELL-7

T21000

T21100

Complete Bar covers
all sizes from1/8" to 1/2" in one tool    

HY-EX-6

New Hydraulic Expander tool kit with 6 expander heads to cover all size tubes of 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,1 1/8” diameter. Using hydraulic power this lightweight expander makes a perfect expansion of copper and aluminium tubing with only a few pumps.   

HY-EX

Expander tool without expander heads   

14297-RF

SW-124-C

The combination ratchet wrench provides 4 sizes in one tool:
•  9/16“ hex for dust cap on valves and for bolts   on compressors

•  1/2“ hex for screws
•  1/4“ square for valves
•  3/16“ square for refrigerant cylinders

SW-127-C

The ratchet wrench for compressors – designed for jobs in narrow spaces

•  Square: 1/4“ x 3/8“
•  Square: 3/16“ x 5/16“

SW-127-OFFSET

RFA-124-C

RFA-127-C

RFA-127-C-OFFSET

Offset wrench

KKS-38

Ratchet wrench with extendable reversible L-shape handle.

Ideal if space is tight,
3/8" square.
Blister packaging.

TW-8

The complete torque wrenches kit in a handy case

Torque: 10-80 ft/lbs
Size of wrenches:
17, 19, 22, 24, 26, 27, 29 mm

14142

Fin comb, 6 in 1 with sizes marked
on the comb.

Comes with additional spare head
in bag

14144

Fin comb for cleaning and straightening fins quickly and easily.

Adjustable tension

14225

21702

REFCO charging oil pump.

Pumps one quart of oil in
20 strokes.

21751

32515

Charging and evacuation valve key
for fluid filling or withdrawal through Schrader valves.

Increases speed of recovery and charging

32520

Valve core replacing tool

32525

Valve core replacing tool with adjustable vacuum gauge access port 1/4" SAE.

32520-555

O-ring set complete 

A-32000

Valve core tool.

Contains 6 extra cores and
one extra core remover and tap

Solenoid Valve Operating Magnet

• The quickest and easiest way to operate solenoid valves manually
• Converts electronically operated solenoid valves into hand operated valves in seconds
• Proven design that fits about 90 % of solenoid valves
• Opening is 18 mm or 0.75 inch

NFT5-4

Quick seal 1/4" SAE flare cap
with gasket

Gas Pressure Test Kit